Electrical Liquid tape






PRODUCT DESCRIPTION

PRODUCT BENEFITS

Liquid Electrical Tape is a quick drying black coating for wiring and electrical connections. It creates a continuous waterproof seal that prevents corrosion and remains flexible when dry.

  • Provides a flexible coating for electrical wiring
  • Permits flow of electrical current
  • Waterproof- prevents moisture and corrosion
  • Eliminates the need for electric tape or shrink tubing
  • Remains flexible after curing
  • UV resistant

TYPICAL APPLICATIONS

  • Underground wiring
  • Outdoor lighting fixtures
  • Bilge pumps
  • Terminal blocks
  • Exposed wires

DIRECTIONS FOR USE

  1. For best results, avoid direct sunlight, high humidityor windy conditions.
  2. Always disconnect power before applying.
  3. Stir well before using.
  4. Make sure surfaces are clean and dry.
  5. Apply liquid tape to connection or repair area.
  6. Allow 10 minutes minimum between coats. Aminimum of two coats is recommended.
  7. Allow 4 hours minimum dry time before use.
  8. Allow Liquid Electrical Tape to dry completely beforerestoring power.

STORAGE

Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 C and 28C

PHYSICAL PROPERTIES OF MATERIAL

  • Chemical Type Proprietary compound
  • Appearance Black liquid
  • Specific Gravity 0.97
  • Flash Point, SCC C (F) 16 (60)
  • Temperature Range F(C) -65 to 400 (-54 to 204)
  • Dielectric Strength, ASTM D-149 1117 volts/mil (6.3 milthickness)